BLOBEL Flood Barrier System protecting your assets

Are you affected by the recent, more and more extreme weather conditions? Have they caused damage to your

local infrastructure, facility and caused some devastation to the environment?


A fully demountable Flood Protection System responds to this need,

according to Blobel.

It is designed to protect private and commercial assets from rising floodwaters and mud.

Discover more

The Flood Barrier System (type BL/HSW-SB pictured) consists of several hollow aluminium segments which are placed into U-type or H-type steel posts The devices are designed to be either demountable or permanently anchored in place. The Flood Defense System is custom built to fit the required retention height and width and can be universally applied to doors, gates and retention walls in open areas.

Stability with high water pressure

Depending on water flow and sealing direction, the Blobel BL/HSW-SB Flood Protection segments are designed to fill with water. This considerably increases stability of the Flood Defense System. The System is available in 50mm and 80mm wide designs.

A compressible, highly adaptable seal is attached at the lowest barrier section. Each other barrier section is fitted with an easily compressed seal based on EPDM. Generally, it is not necessary to level the floor or incorporate steel plates within the concrete floor. Uneven ground, corrugated sheet metal, tiles and stones up to 20mm are handled with ease.

During stand by time the system is easily stored. The Flood Barrier System is designed to use as little space as possible and the segments can be stored on walls using specifically designed racks.

Calling all Architects and Engineers